I'll give you a link to your owners manual that you can download and I hope that the link works. Push primer bulb 2 or 3 times for a cold engine. See engine manual for proper storage. Visite a su distribuidor o vaya a www. Understand and follow all safety messages. Be especially cautious when changing direction on slopes. Throttle Control Lever The throttle control lever controls the Fast Slow Stop speed of the engine.
Keep all nuts, bolts and screws properly tightened and know unit is in safe working condition. If the trimmer head does not disengage completely when the control bail is released, increase the amount of slack in the control cable wire as follows: 1. To raise the cutting height, place more spacers up to 4 below the cutter disk. Keep all hardware properly tightened. Keep children out of the work area and under the watchful care of a responsible adult.
See Starting and Shut Off. Ariens disclaims liability for any claims or damages, whether warranty, property damage, personal injury or death arising out of the use of unauthorized replacement parts. Learn applicable rules and laws in your area. Do not use a nozzle lockopen device. Fuel Tank and Cap 3.
Please get your model and serial number and then enter them into the following site's search engine. Visite a su distribuidor o vaya a www. When trimmer head is rotating at full speed, move unit forward to trim. Put unit in open or well-ventilatedarea. Spacers not used under the cutter disk must be assembled above the cutter disk.
Fill out Original Purchaser Registration Card and return the card to Ariens Company. Oil Dipstick and Cap 10. Review control functions and operation of the unit. Unintentional engine start up can cause death or serious injury. See Specifications for tank capacity. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual.
Objects may be picked up and thrown causing damage or personal injury. Remove protective packaging materials from trimming head and around unit. Maintain or replace safety and instruction labels, as necessary. Read, understand, and follow all instructions in the manual and on the machine before starting. Allow rope to rewind slowly. If this is not possible, then refuel such equipment on a trailer with a portable container, rather than from a gasoline dispenser nozzle.
Keep safety devices or guards in place and functioning properly. Numbers are located on the product registration form in the unit literature package. Use extra care when approaching blind corners, shrubs, trees, or other objects which may obscure vision. If you strike an object, or if equipment vibrates abnormally, stop engine at once, wait for moving parts to stop and disconnect wire from spark plug. Oil Dipstick and Cap 2. If you do not feel comfortable on a slope, do not trim it. Do not operate trimmer in wet grass.
Stop engine if anyone enters the work area. Then pull rope with rapid continuous full arm stroke to start engine. Wear sturdy footwear, gloves and safety goggles or safety glasses with side shields while operating mower. Whenever operator releases control on handlebar, trimmer head must stop. Keep equipment in good condition. Nothing contained in this warranty shall be construed as obligating Ariens to incorporate such design changes into previously manufactured products, nor shall such changes be construed as an admission that previous designs were defective. The descriptions and specifications contained in this manual were in effect at printing.