Either action may When descending a long, steep grade, cause one or both wheels to slip and use engine compression braking by reduce your control of your motorcycle. Wheel removal requires mechanical skill and professional tools. The following pages give detailed information on how and when to check Servicing Your Honda. Severely discharged or a damaged battery should have 12. Do not attempt to remove the wheel on your own. Check for deterioration or cracks in the hoses and fittings. We take great pride in the accuracy of information given in this manual, but motorcycle manufacturers make alterations and design changes during the production run of a particular n motorcycle of which they do not inform us.
Answered on Mar 03, 2019 There are two things which stop an engine running; lack of spark and lack of fuel. The reason is that I have seen vehicles that have had an auxiliary part such as an alternator or air conditioner compressor seize up and not allowing the engine to rotate. Shift mechanism arm spring is broken. Refer to the indicators 4 turn signal indicator frequently. If one of these indicators does not come on when it should, have your Honda dealer check for burned-out bulbs or other problems. If a label comes off or becomes hard to read, contact your Honda dealer for a replacement. Chances are, because the engine starts, it's not the spark.
And operating this motorcycle safely is an important responsibility. Be sure to read the information that came with your battery charger and follow the instructions on the battery. Start the engine, leaving the throttle To restart a warm engine, follow the closed. In this position, the E-starter and ignition circuits are interrupted. Gear seized on the shaft.
The E-starter cannot be actuated, and the engine will not start, not even if you attempt to start it with the kickstarter. Both the pre-ride inspection and the scheduled maintenance at the recommended intervals are necessary to assure safe and dependable performance. It is an amazingly comfortable bike. To operate, push the horn button. Taking Care of the Unexpected. Taking Care of the Unexpected.
Shift mechanism arm is broken. Refer to the official Honda Service Manual. Taking Care of the Unexpected. Shift mechanism arm spring is broken. Leave the blown fuse in that circuit and have your motorcycle checked by your Honda dealer.
Some fairings or windscreens, even smaller We strongly advise you not to remove any ones, can cause unstable handling of original equipment or modify your your motorcycle. Shift return spring pin loose 8. A passenger should hold onto the motorcycle or the rider with both hands, and keep both feet on the passenger footrests. Good luck and have a wonderful day. Wheel removal should Failure to properly follow normally be handled only by a Honda technician or other qualified mechanic. They may affect lubrication and clutch performance.
Please report any change of address or ownership to your Honda dealer so we will be able to contact you concerning important production information. Remember, more frequent checks may be needed for riding in severe conditions. Front disc brake with twin-piston caliper. Answered on Feb 21, 2019 First, try to turn the engine over by hand. The button is used to change between display modes. Charge the battery page as required.
Good luck and have a wonderful day. Idle speed in neutral : 1,400 100 rpm Servicing Your Honda. If the tire is losing pressure, it may be unsafe to continue Riding your motorcycle with a riding. Do not attempt to disassemble, service, or dispose of the damper; see your Honda dealer. Wheel removal requires mechanical skill and professional tools. Improper clutch adjustment or not disengaging. Using spark plugs with an improper heat range can cause engine damage.
Owner's Manuals explain the operation and care of your vehicle. Because Honda cannot test all. Good luck and have a wonderful day. Improper shifting may damage the engine, transmission, and drive train. Or last and being desperate you can turn the bike upside and tuy and get it to fall back out - be mindful if you do this all the fluids will start to run and so may be best to drain all the fluids before trying this. Also check for a safety switch on the kick stand.
Do not install car tires on this motorcycle. The Rebel is just a fun machine. Never touch any part of the hot exhaust system. Your size and manoeuvrability can surprise other motorists. Hydraulic front fork with dual Syntallic bushings.